|
 Extruded frame is made by passing molten aluminum
through dies to form hallow frame. It has a heavier wall thickness and
no seams. With 5/16" x 15/16" dimensions and
.035" wall thickness, it is used for larger screens using
heavier screening materials.
It can be purchased in --
Half Screen Kits -- Designed to make ten window screens up to 47" x
47",
Full Screen Kits -- Designed to make ten window screens up to 47" x
95", or
Individually -- in 95" Lengths
Colors Available : Bronze, White, or Unpainted
|
|
Extruded Frame Half-Screen Kit
Contains 40
lengths of frame 47" long -- enough to make 10
screens up to 47" x 47". Kit also has the necessary corner
inserts, 3" flat tension springs, pull tabs and spline -- everything but the screening material
which can be ordered separately.
|
|
Extruded
Frame Full-Screen Kit
Contains 36 lengths of frame
95" long -- enough to make 10 screens
up to 47" x
95" with center bar. Kit also has the
necessary corner inserts, 3" flat tension
springs, pull tabs, center bar clips and
spline -- everything but the screening material which can
be ordered separately.
|
|
Extruded
Frame, 5/16" x 15/16" x 95"
Individual lengths of frame
can be ordered in addition to Kits.
|
 Corner Insert,
Extruded Frame
Vinyl corner insert for 5/16" x 15/16"
extruded frame.
Available individually or in packages of 100 each.
|
|
 Center Bar Clip, Narrow
Stamped Aluminum. Used to hold center bar in place.
Clip is laid in spline groove and spline is rolled in to hold
clip in place.
Comes in packages of 1000 or can be bought individually,
|
|
 .135 Spline, Serrated
Vinyl spline with .135 diameter in a black color.
Available in 100' roll or 15 pound roll (2190' Approximately)
|
|
 Casement Clip, Metal, 5/16"
Metal clip with 5/16" offset used to hold a Surface
mounted screen made with 5/16" frame.
|